Sürekli yük gerilim düşümü: 125%, kablo kesiti ve NEC/IEC
EVSE, aydınlatma ve ısıtıcı devrelerini NEC 210.20, NEC 215.3, NEC 625 ve IEC 60364 ile boyutlandırın.
Sürekli yük akımı saatlerce devam eder. 48 A EV şarj, 18 A aydınlatma hattı veya 36 A ısıtıcı için sadece kesici değeri değil, gerçek gerilim düşümü de kontrol edilmelidir.
Özet
- 3 hours or more makes the load continuous in NEC practice.
- 125% sizing and voltage-drop calculation answer different questions.
- Use branch, feeder, and total voltage-drop budgets together.
- EVSE, lighting, heaters, and ventilation loads need sustained-current checks.
Sürekli yük, maksimum akımın 3 saat veya daha uzun süreceği yüktür. Gerilim düşümü, iletken empedansındaki voltaj kaybıdır. Ampasite, iletkenin sıcaklık sınırını aşmadan taşıyabileceği akımdır.
Önce NEC 210.20(A), 215.3 veya 625 altında 125% boyutlandırmayı yapın; sonra gerçek sürekli akım, mesafe, malzeme ve feeder payı ile düşümü hesaplayın. NEC and IEC references keep the thermal and performance checks separate.
The 125% continuous-load rule is a heat and protection rule; it does not erase the resistance of a 150-foot branch circuit.
— Hommer Zhao, Technical Director
Continuous-load design checks
48 A, 240 V EVSE genelde 60 A devre ister. 6 AWG bakır ve 165 ft tek yön mesafede dal devre yaklaşık 6,3 V yani 2,6% düşer; feeder 1,8% ise toplam 4,4% olur.
| Load | Sustained current | NEC basis | Route | Design action |
|---|---|---|---|---|
| Level 2 EVSE | 32 A at 240 V | 40 A circuit | 130 ft | Compare 6 AWG Cu |
| High-output EVSE | 48 A at 240 V | 60 A circuit | 165 ft | Check feeder plus branch |
| LED lighting row | 18 A at 277 V | 125% review | 240 ft | Split row or upsize |
| Process heater | 36 A at 208 V | 45 A design current | 110 ft | Check 6 AWG and source |
| Exterior lighting | 12 A at 120 V | 15 A basis | 95 ft | Use 10 AWG or split |
For a 48-amp EV charger, document the 60-amp circuit sizing and check voltage drop at the sustained charging current.
— Hommer Zhao, Technical Director
Practical warning
125% kuralı ısınma ve koruma içindir; uzun kablonun direncini yok etmez.
Use the wire size calculator, the NEC requirements article, and the voltage drop vs ampacity guide together before material is released.
Continuous loads turn small voltage-drop misses into daily operating losses because the circuit stays loaded for hours.
— Hommer Zhao, Technical Director
FAQ
100% mü 125% mi?
Gerilim düşümü için gerçek sürekli akımı, devre seçimi için gerektiğinde 125% kullanın.
EVSE sürekli yük mü?
Evet. NEC 625 EVSE için sürekli yük kabul eder; 48 A genelde 60 A devredir.
Aydınlatmada hedef nedir?
Dal devre 3%, toplam 5% yaygın hedeftir.
Ne zaman kesit büyür?
Mesafe uzun, feeder 2% civarı, gerilim zayıf veya çalışma 3 saati aşıyorsa.
IEC nasıl bakar?
IEC 60364-5-52 akım, tesisat yöntemi, gruplama, sıcaklık ve izin verilen düşümü birlikte ele alır.
Kablo çekmeden önce minimum kesit ile bir büyük kesiti hesaplayıcıda karşılaştırın.
Start Calculating
Ready to apply these concepts to your project? Use our professional voltage drop calculator.
Open Calculator